UCS Appliance

From Univention Wiki

Revision as of 19:34, 25 January 2012 by Crunchy (talk | contribs)
Jump to: navigation, search
Produktlogo UCS Version 3.0

The following steps are required to create an appliance based on UCS 3.0. It is recommended to use at least UCS 3.0-1.

Until the release of UCS 3.0-1 it is possible to update the required packages. Simply add the following lines to /etc/apt/sources.list:

deb http://download.univention.de/download/fixes/ system-setup/all/
deb http://download.univention.de/download/fixes/ system-setup/$(ARCH)/

These packages provide a few enhancements and fixes for Univention system setup boot of UCS 3.0-0. If UCS 3.0-1 is released these packages are obsolete.

Afterwards, secure apt has to be deactivated and the system can be updated:

$ ucr set update/secure_apt="no"
$ univention-upgrade

Domaincontoller Master

  • While selecting the system role in UCS, F3 must be pressed. This will disable the join scripts.
  • The software component Desktop environment must be selected.
  • After everything is finished the package univention-system-setup-boot must be installed.
    univention-install univention-system-setup-boot
  • On next boot the basic settings UMC module will be started.

Other systems

  • The join must be disabled in the UCS Installer.
  • The software component Desktop environment must be selected.
  • After everything is finished the package univention-system-setup-boot must be installed.
    univention-install univention-system-setup-boot
  • On next boot the basic settings UMC module will be started.
Personal tools