Difference between revisions of "UCS Appliance"

From Univention Wiki

Jump to: navigation, search
Line 11: Line 11:
 
* The software component ''Desktop environment'' must be selected.
 
* The software component ''Desktop environment'' must be selected.
  
* After everything is finished the UCR variable ''system/setup/boot/start'' must be set to ''true''. <pre>ucr set system/setup/boot/start=true</pre>
+
* After everything is finished the package univention-system-setup-boot must be installed. <pre>univention-install univention-system-setup-boot</pre>
 
 
* The package univention-system-setup-boot must be installed. <pre>univention-install univention-system-setup-boot</pre>
 
  
 
* On next boot the basic settings UMC module will be started.
 
* On next boot the basic settings UMC module will be started.

Revision as of 12:59, 25 November 2011

Produktlogo UCS Version 3.0

Kategorie:UCS 3.0

UCS Appliance

The following steps are required to create an appliance based on UCS 3.0.

Domaincontoller Master

  • While selecting the system role in UCS, F3 must be pressed. This will disable the join scripts.
  • The software component Desktop environment must be selected.
  • After everything is finished the package univention-system-setup-boot must be installed.
    univention-install univention-system-setup-boot
  • On next boot the basic settings UMC module will be started.

Other systems

  • The join must be disabled in the UCS Installer.
  • The software component Desktop environment must be selected.
  • After everything is finished the UCR variable system/setup/boot/start must be set to true.
    ucr set system/setup/boot/start=true
  • The package univention-system-setup-boot must be installed.
    univention-install univention-system-setup-boot
  • On next boot the basic settings UMC module will be started.
Personal tools