Cool Solution - Run UCC Thinclients from USB-Stick

From Univention Wiki

Revision as of 13:45, 25 March 2014 by Smidt (talk | contribs)
Jump to: navigation, search
Produktlogo UCC Version 1.0

Note: Cool Solutions are articles documenting additional functionality based on Univention products. Not all of the shown steps in the article are covered by Univention Support. For questions about your support coverage contact your contact person at Univention before you want to implement one of the shown steps.

Also regard the legal notes at Terms of Service.

This article describes briefly how you can set up a UCC Thinclient on a USB-Stick to run it apart from your own device.

  • UCS DC Master with installed modul UCC

There are two possible ways to install the UCC on a USB-Stick. For the first solution it is necessary to build your own UCC local image according to the UCC-manual. Here you can set the parameter "device" with "hda", "sda", "auto" etc. The "auto" determine the first available device and therefore the second solution will be described.

Demount Flash from Thinclient

The UCC Boot-Menu does not provide a particular Boot-Parameter to select a Boot-Device and therefore it is necessary to demount the flash from the thinclient.

PXE-BOOT with Thinclient

Attach a USB-Stick on the thinclient and rollout the UCC image via PXE. The USB-Stick should be automatically detected. Choose "Image boot with update check / Initial installation" and "Repartitioning for installed systems" in the Univention-Management-Console. It is necessary to join the client one time but afterwards it is possible to use the USB-Stick on any other device.

Personal tools